How to modify and/or update a MEMORY PLAN RADIO, TV or SAT on the instrument via PC and ROVER interface program S.M.A.R.T. PRO

CAUTION: Before performing any upgrade of your tool, download and install in your PC the latest SW version of the program interface ROVER-S.M.A.RT.
Please note that the interface S.M.A.R.T. program supports Windows operating systems only and cannot supports MAC operating systems. 

  • Click here to get the latest SW “S.M.A.R.T.” version issued by ROVER available within the "Update SW" area;
  • Click here to check the “S.M.A.R.T.” SW version currently installed on your PC.

IMPORTANT: Get updated lists of World Wide Satellite Trasponder directly from the site “www.lyngsat.com“ to update or modify your plans of memory.

Through the program interface ROVER-S.M.A.R.T., you can transfer PLANS MEMORY already stored in the instrument to the PC to be able to edit. MEMORY PLANS include:

- Manuals memories containing mixed programs (Radio-TV and SAT) made by the user (for example, plans MANU01 manuals, MANU02, etc.);
- LISTS of SATELLITES (eg Hot Bird 13° Est-HBIR13, Astra 19° Est-ASTR19, etc.).

NOTE: The factory prememorize LIST of SATELLITES can be changed, but you can not add new satellite orbit position.

CONNECTION between PC and instrument:
1) Connect the instrument to the PC using the USB data cable supplied;
2) Turn on the instrument;
3) Start the application ROVER-S.M.A.R.T.;
4) From the toolbar, click the "Instrument" and "Connect Instrument" (see note).

To TRANSFER MEMORY PLANS from instruments to the PC:
5) Click "Instrument" and click the "Instrument File Manager";
6) Wait for the download of the plans of memory in the PC;
7) Yuo can see the window “INSTRUMENTS FILE MANAGER”;
8) In the "Find in" click the folder "Mem. Plan" to see the plans of memory;
9) Click TWICE on the MEMORY PLAN of memory that you want to change,
10) You can see the list of PROGRAMS/TRASPONDER contained in the selected memory plan.

A) To MODIFY PROGRAM/TRASPONDER already exists:
11) Click TWICE on the PROGRAM/TRASPONDER to edit;
12) Change the parameters (frequency, symbol rate, polarity and band, local oscillator, etc.);
13) When done, click "Yes" to confirm the changes.

B) To ADD a NEW PROGRAM/TRANSPONDER:
14) To add a new program/transponder, restart from step 10, click with the right mouse button on the program/transponder concerned;
15) Click “Add”,
16) Enter all the parameters related to the new program/transponder to add (frequency, symbol rate, polarity, band, local oscillator, etc.);
17) Click "Yes" to confirm the changes.

C) To DELETE a PROGRAM/TRASPONDER already exists:
18) To delete existing program/transponder, restart from step 10, click with the right mouse button / program transponder concerned;
19) Click the “Delete”;
20) Click “Yes” to confirm the deletion.

D) To CLEAR a FULL MEMORY PLAN in to the INSTRUMENT:
21) If you want to delete a full MEMORY PLAN restart from point 8 as follows;
22) Click ONCE on the PLAN of memory you want to erase;
23) From the windows “INSTRUMENTS FILE MANAGER” click “Delete”;
24) Click "Yes" to confirm the deletion;
25) The plan of the memory will be erased on the instrument.

E) To TRANSFER the modified MEMORY PLAN from the PC to the INSTRUMENT:
26) After the changes (change-addition-deletion of program/transponder), click on the "PC-Instrument" icone in the "MEM. PLAN properties:" (on the right side of the screen) to transfer the modified memory plan to the instrument;
27) The new plan will replace the previously.

NOTE: If the operation is successful, in the bar below the PC will be displayed connected instrument's data: model, serial number, firmware version (FW) and port number (COM) connected.

  • Click here if you want to download this "FAQ" in pdf format;
  • Click here if you want to download the "ROVER S.M.A.R.T. interface program user guide" complete in pdf format.


Company & contacts Products & APP Information Contacts