Correct power OFF/ON procedure for ROVER instruments to avoid occasional Memory Plans and navigation cancellation

The red button ROVER_HOME_RESETROVER_HOME_RESET has four timed functions:

1st) One shot = turn-ON
2nd) One shot (when on) = always goes the to HOME MENU
3rd) If kept pressed for 2 seconds = turn-OFF
4th) Kept pressed for about 10 seconds = HW reset, Forced turn-off, (interrupts the ongoing data saving in memory).


Press once the red button ROVER_HOME_RESETROVER_HOME_RESET and wait until the start-up is completed, about 20 seconds (do not press it again during the start-up phase).


Press and hold the red button ROVER_HOME_RESETROVER_HOME_RESET , the instrument will emit a first beep immediately and a second BEEP after about 2 seconds, then release immediately the red button ROVER_HOME_RESETROVER_HOME_RESET (even if the display is still active and shows the batteries instructions).


Do not keep pressed the red button  ROVER_HOME_RESETROVER_HOME_RESET after the second BEEP, to avoid starting the HW reset function (forced turn-off see poit 4). Basically, every time you turn off the instrument, it needs about ten seconds to save the data in memory before turn-off. If accidentaly you interrupt this storing process, activating the HW Reset function the data in memory could be corrupted. In any case you can restore the memory plans yourself with a PC by following the instructions in the "F.A.Q." under the heading "Simple SW self repair".

  • Clich here if you want to townload this "F.A.Q" in pdf format.

Company & contacts Products & APP Information Contacts