AUTOMEMORY TV: How to automatically store all existing TV channels in a city, building, or CATV network

IMPORTANT:

1) This STANDARD PROCEDURE is valid for all ROVER and PRIME DIGITAL models with SINGLE DISPLAY TFT color, writing and graphics can vary from model to model;
2) For TOUCH-SCREEN models, you can select functions directly without rotating the ENCODER.

For the HD TAB 4, TAB 7, TAB 700,TAB 9, TAB 900 and PROTAB Series
For the EASY METER by PRIME DIGITAL Series
For the HD LIGHT, COMPACT, FLASH, TOUCH and PRO
For the ATOM LIGHT Series
ATOM POWER, DIGICUBE and TOUCHMETER

Using the instrument keyboard you can create directly in the instrument, MANUAL MEMORY PLANS, such as MANU 1, MANU 2, MANU 3, etc., by storing a list of your favorite TV channels.

STANDARD PROCEDURE:

1) Turn on the instrument,

2) Make sure you have selected your language,

3) Make sure you have selected the TV or CATV operation mode,

4) Rotate the encoder and select the "MEMORY" icon (see figure 1),

 ROVER_HD_Series_MEMORY
Figure 1: HOME MENU - MEMORY icon selection

5) Press the encoder to confirm,

6) Rotate the encoder and select "AUTOMEMORY TV" (see figure 2),

7) Press the encoder to confirm,

  • NOTE: Make sure you have set the correct TV channel in "FROM PLAN:": for ITALY select "EUROPE"

8) Rotate the encoder and select the "TO FILE N:" (destination) item (see figure 2),

9) Press the encoder to confirm,

10) Rotates the encoder and selects the desired memory location, such as AUTO 1, AUTO 2, AUTO 3, etc. where to save the result of automatic search (see Figure 2),

11) Press the encoder to confirm,

12) Rotate the encoder and select "LEVEL:" (see figure 2),

13) Press the encoder to confirm,

14) Rotate the encoder and set the minimum level of ANALOGUE channels to be searched (only if present or distributed within the system),

15) Press the encoder to confirm,

16) Rotate the encoder and select the item "POWER" (see figure 2),

17) Press the encoder to confirm,

18) Rotates the encoder and sets the minimum power threshold of DIGITAL channels to be searched,

19) Press the encoder to confirm,

20) Rotate the encoder and select "DISCOVERY:" (see Figure 2),

21) Press the encoder to confirm,

22) Rotates the encoder and selects the desired signal recognition (DISCOVERY) mode:

  • "TERR. ONLY": only "terrestrial" TV channels;
  • or "TERR@CABLE": terrestrial TV channels and CATV channels via cable;

24) Rotate the encoder and select the item "DC@RF:" (see figure 2),

23) Press the encoder to confirm,

25) ONLY if necessary, press the encoder to confirm and rotate to select the power supply voltage to be provided to the system (Pole Switch, Line Amplifier, etc.): 5V-12V-18V or 24V, the encoder to confirm,

  • NOTE: The power supply voltage can only be selected if "DISCOVERY: TERR. ONLY" mode is selected (can not be selected in TERR@CAVO mode),

26) Rotate the encoder and select "START SAVE?" (see Figure 2),

 ROVER_HD_Series_START_SAVE
Figure 2: START SAVE? selection
  • NOTE: If the word "START OVERWRITE?" appears the selected AUTO plane will be overwritten, and will erase the previous channels (see Figure 3),
ROVER_HD_Series_START_OVERWRITE 
Figure 3: START OVERWRITE? selection

27) Press the encoder to start the search and create a new channel plan (see figure 4),

ROVER_HD_Series_AUTOMEMORY_tv_scan 
Figure 4: Automatic scan of current channels

28) Wait a few minutes at the end of the search, the instrument will show the recorded analog and digital channels at the top and the word "COMPLETED - EXIT" will appear (see figure 5),

ROVER_HD_Series_COMPLETED_EXIT 
Figure 5: Searching for COMPLETED channels

29) Press the encoder to exit the screen or press the "TV" key directly to perform the measurements or the "SPECT" key to display the spectrum of the received signal directly in the new auto memory plan created: eg AUTO 1, AUTO 2, AUTO 3, etc.,

30) To recall the AUTOMATIC MEMORY plan (in our example AUTO 1) press the "PLAN" key, rotate the encoder to "AUTOMEMORY tv", press the encoder, rotate the encoder on the "AUTO 1" and then directly selects the relevant operating mode: MEAS (measurement), SPECT (spectrum), etc. (see figure 6),

31) Press the encoder to go directly to the selected fusion.

ROVER_HD_Series_AUTOMEMORY_tv_AUTO_1 
Figure 6: Selecting the AUTO 1 memory plan

NOTE: The MENU (written and graphic) of the figures shown in the following "F.A.Q." may vary from model to model or depending on SW upgrade.



Company & contacts Products & APP Information Contacts