MANUMEMORY: How to create a TV MANUAL MEMORY PLAN directly in the instrument via its keyboard

IMPORTANT:

1) This STANDARD PROCEDURE is valid for all ROVER and PRIME DIGITAL models with SINGLE DISPLAY TFT color, writing and graphics can vary from model to model
2) For TOUCH-SCREEN models, you can select functions directly without rotating the ENCODER.

For the HD TAB 4, TAB 7, TAB 9 and PROTAB series
For the EASY METER of PRIME DIGITAL series
For the HD LIGHT, COMPACT HD, FLASH, TOUCH and PRO series
For the ATOM LIGHT series, ATOM POWER, DIGICUBE and TOUCHMETER

Using the instrument keyboard you can create directly in the instrument, MANUAL MEMORY PLANS, such as MANU 1, MANU 2, MANU 3, etc., by storing a list of your favorite TV channels.

STANDARD PROCEDURE:

1) Turn on the instrument,

2) Make sure you have selected your language,
3) Press the "TV" key ROVER_TV,
4) Press the "HOME" key ROVER_HOME,

5) Rotate the encoder and select the "MEMORY" icon (Figure 1),

ROVER_HD_Series_MEMORY
Figure 1: HOME MENU, MEMORY icon selection

6) Press the encoder to confirm,

7) Rotate the encoder and select "MANUMEMORY" (Figure 2),

8) Press the encoder to confirm,

9) Press the encoder again,

10) Rotate the encoder and select a free "PLAN" manual memory of your choice: for example "MANU 2" (Figure 2),

11) Press the encoder to confirm,

12) Rotate the encoder and select "START EDIT" (Figure 2),

ROVER_HD_Series_MANUMEMORY_START_EDIT
Figure 2:"MANUMEMORY", "PLAN" and "START EDIT"

13) Press the encoder to confirm,

14) Press the encoder again,

15) Rotate the encoder and select "MODIFY ITEM" (Figure 3),

ROVER_HD_Series_MANUMEMORY_MODIFY_ITEM
Figure 3: Written Selection "MODIFY ITEM"

16) Press the encoder to confirm,

17) Rotate the encoder and select "MODE" (Figure 4),

18) Press the encoder to confirm,

19) Rotate the encoder and select "DVBT&T2" (Figure 4),

20) Press the encoder to confirm,

21) Rotate the encoder and select "CHANNEL" (Figure 4),

22) Press the encoder to confirm,

23) Rotate the encoder and select the TV channel you want to store (eg E5),

24) Press the encoder to confirm,

25) Rotate the encoder and select "BW" (bandwidth) (Figure 4),

26) Press the encoder to confirm,

27) Rotate the encoder and select the exact baum width value:

  • "7" MHz for all VHF and CATV channels up to 300 MHz;
  • "8" MHz for all UHF channels from 300 MHz ≥ CATV;
  • AUSTRALIA "7" MHz for all VHF-CATV-UHF channels;
  • USA "6" MHz MHz for all VHF-CATV-UHF channels

28) Press the encoder to confirm,

29) Rotate the encoder and select "SAVE?" (Figure 4),

ROVER_HD_Series_MANUMEMORY_SAVE
Figure 4: Selecting all parameters and "SAVE?"

30) Press the encoder to confirm (Figure 5),

ROVER_HD_Series_MANUMEMORY_E5
Figure 5: Manual channel memory created

31) To continue adding a new channel below the previously stored channel to the same MANUAL MEMORY, select "ADD BELOW" (Figure 6) and proceed as indicated in step 20 forward,

ROVER_HD_Series_MANUMEMORY_E5_ADD_BELOW
Figure 6: Written selection "ADD BELOW"


ROVER_HD_Series_MANUMEMORY_40
Figure 7: Channels E11, 23, 26, 30, 36 and 40 added under channel E5

32) To add in the same channel NEW MEMORY channel above the previously stored channel (in the example of Figure 8 the channel 23), select the word "ADD ABOVE" (Figure 8) and proceed as indicated in point 20 forward,

ROVER_HD_Series_MANUMEMORY_23_ADD_ABOVE
Figure 8: Written Selection "ADD ABOVE"


ROVER_HD_Series_MANUMEMORY_21
Figure 9: Channel 21 added on channel 23

33) To replace a previously stored channel, after selecting the channel to be edited (in the example shown in Figure 10, channel E5), select "MODIFY ITEM"  (Figure 10) and proceed as follows As indicated in step 20 above,

ROVER_HD_Series_MANU_MEMORY_E5_MODIFY_ITEM
Figure 10: Written Selection "MODIFY ITEM"


ROVER_HD_Series_MANUMEMORY_E7
Figure 11: Channel E5 edited in E7

34) To delete a previously stored channel, after selecting the channel to be deleted (in the example of Figure 12, channel 36), select the "DELETE ITEM" message (Figure 12).

ROVER_HD_Series_MANUMEMORY_36_DELETE_ITEM
Figure 12: Written selection "DELETE ITEM"


ROVER_HD_Series_MANUMEMORY_30
Figure 13: Channel 36 deleted

NOTE: The MENU (written and graphic) of the figures shown in the following "F.A.Q." may vary from model to model or depending on SW upgrade.



Company & contacts Products & APP Information Contacts