mod. ROF-1-OTX-S
RF TX PARAMETERS
- RF Input frequency range: 45-3000 MHz
- Flatness: +/- 1.5 dB
- 36 MHz Flatness: +/- 0.3 dB
- RL: > 14 dB (75 ohm)
- Noise Figure: < 10dB @ max gain
- IMD: 50 dBc@ 2 tones -13 dBm
- OP1: + 5 dBm (RMS)
- RF Input power Range: – 50 to -10dBm (RMS)
- RF Damage Input Level: + 15 dBm (RMS)
- RF adjustable Gain: 30 dB (AGC/MGC) with internal settings
- LNB powering with external adapter: 0, 13V, 18V, 22 KHz, 600 mA.
- Test Point output level: @ -20 dB of RF input
OPTICAL TRANSMITTER
- Power output: 4.5 dBm
- Wavelength: 1310nm /1550 nm
- Connectors: water protected SC/APC
- LASER: DFB, Class 1M
- MAX Transmission distance 60Km @ 1310nm or 90Km @ 1550 nm
OTHERS
- Casing: ODU IP 67
- Visible Status LEDs for: PSU, RF power input, Laser and LNB
- Redundant external power supply
- Operating temperature: – 40°C to 55°C
- Weight: 400g
- Size: 115 X 100 (133 including connectors) X H57 mm
mod. ROF-1-ORX-S
RF RX PARAMETERS
- RF Output frequency range: 45-3000 MHz
- Flatness: +/- 1.5 dB
- 36 MHz Flatness: +/- 0.3 dB
- RL: > 14 dB (75 ohm)
- Noise Figure: < 10dB @ max gain
- IMD: 50 dBc@ 2 tones -13 dBm
- OP1: + 5 dBm (RMS)
- RF Output Power Range: – 50 to -10dBm (RMS)
- RF adjustable Gain: 30 dB (AGC/MGC) with internal settings
- Test Point output level: @ -20 dB of RF output
OPTICAL RECEIVER
- GAIN : automatic or manual
- Input power sensitivity range: – 20 to +4 dBm
- Wavelength: 960 to 1650 nm
- Connectors: water protected SC/APC
- Input power measurement: – 30 to +5 dBm
- Photodiode: PIN
- Optical demage Input PWR +12 dBm
OTHERS
- Casing: ODU IP 67
- Visible Status LEDs for: PSU, Optic pwr and RF output pwr
- Redundant external power supply
- Operating temperature: – 40°C to 55°C
- Weight: 400g
- Size: 115 X 100 (133 including connectors) X 57 mm
OPTIONS
- LNB corrent monitor Led via fiber
- RF over drive Monitor Led via fiber
