Link RF Ottico modulare da esterno a 1 ingresso

• Professional RF over FIBER Link (50 – 3000 MHz)
• Aluminium Outdoor case with wall mount Supports included
• RF Level Test Point @-20 dB for level Monitoring
• TX equiped with Coax DFB single mode Laser 1310 nm to 1.550 nm (opt.)
• RX equiped with Optical Photodiode PIN from 960 nm to 1.650 nm
• 2 Redundant 12V dc PSU Input to guaranty the Quality of Service

mod. ROF-1-OTX-S
RF TX PARAMETERS

• RF Input frequency range: 45-3000 MHz
• Flatness: +/- 1.5 dB
• 36 MHz Flatness: +/- 0.3 dB
• RL: > 14 dB (75 ohm)
• Noise Figure: < 10dB @ max gain
• IMD: 50 dBc@ 2 tones -13 dBm
• OP1: + 5 dBm (RMS)
• RF Input power Range: – 50 to -10dBm (RMS)
• RF Damage Input Level: + 15 dBm (RMS)
• RF adjustable Gain: 30 dB (AGC/MGC) with internal settings
• LNB powering with external adapter: 0, 13V, 18V, 22 KHz, 600 mA.
• Test Point output level: @ -20 dB of RF input

OPTICAL TRANSMITTER

• Power output: 4.5 dBm
• Wavelength: 1310nm /1550 nm
• Connectors: water protected SC/APC
• LASER: DFB, Class 1M
• MAX Transmission distance 60Km @ 1310nm or 90Km @ 1550 nm

OTHERS

• Casing: ODU IP 67
• Visible Status LEDs for: PSU, RF power input, Laser and LNB
• Redundant external power supply
• Operating temperature: – 40°C to 55°C
• Weight: 400g
• Size: 115 X 100 (133 including connectors) X H57 mm

mod. ROF-1-ORX-S
RF RX PARAMETERS

• RF Output frequency range: 45-3000 MHz
• Flatness: +/- 1.5 dB
• 36 MHz Flatness: +/- 0.3 dB
• RL: > 14 dB (75 ohm)
• Noise Figure: < 10dB @ max gain
• IMD: 50 dBc@ 2 tones -13 dBm
• OP1: + 5 dBm (RMS)
• RF Output Power Range: – 50 to -10dBm (RMS)
• RF adjustable Gain: 30 dB (AGC/MGC) with internal settings
• Test Point output level: @ -20 dB of RF output

OPTICAL RECEIVER

• GAIN : automatic or manual
• Input power sensitivity range: – 20 to +4 dBm
• Wavelength: 960 to 1650 nm
• Connectors: water protected SC/APC
• Input power measurement: – 30 to +5 dBm
• Photodiode: PIN
• Optical demage Input PWR +12 dBm

OTHERS

• Casing: ODU IP 67
• Visible Status LEDs for: PSU, Optic pwr and RF output pwr
• Redundant external power supply
• Operating temperature: – 40°C to 55°C
• Weight: 400g
• Size: 115 X 100 (133 including connectors) X 57 mm

OPTIONS

• LNB corrent monitor Led via fiber
• RF over drive Monitor Led via fiber

• Click here to page-flip SATCOM RANGE OVERVIEW: