The professional & accurate Touch Screen Analyzer

The professional & accurate Touch Screen Analyzer

HD TAB 9 Plus

Automatic, fast & easy to use

Broadcasting n Monitoring HD Tab 9 plus Rover vema_technology

Characteristics

  • 9” TFT TOUCH display: 16:9 high resolution and high brightness
  • Power Supply: Built in LiPo battery with up to 6 hours duration & Battery Test function
  • DC voltage at RF input: 5 – 12 – 18 – 24 VDC, DiSEqC A-B-C-D, SCR and dCSS protocoll
  • PC Interface: USB-A
  • Front-Panel: Alpha numeric keypad
  • Power Save: TFT backlight timer, brightness adj.
  • PC Management: SMART software
  • Weight: only 2,6 Kg with batteries
  • Size: H 29,0 x W 17,0 x D 5,5 cm
  • Housing: Aluminium and Steel and padded bag

NOTE:

  • All technical features can change without notice;
  • Some options (APP) must be requested when ordering the instrument;
  • The screens and the texts of the relative MENU, can change without notice from model to model and according to the SW version installed;
  • Visit WWW.ROVERSHOP.IT to check the available accessories.
Benefits
  • Frequency Range: 4-1250 MHz; SAT: 950–2250 MHz (2450 with SAT extension opt.).
  • Frequency Resolution: TV & CATV 25 KHz; SAT: 5 or 1 MHZ selectable
  • Power range Measurement: TV 28 to 130 dBμV, SAT 30 to 130 dBμV
  • Digital Measurement: Digital Power, MER (32 to 42 dB depending on modulation), BER, PER, LDPC, BCH, Noise Margin, MER versus CARRIER
  • Analog Measurement & Picture: Analog level, V/A ratio
  • Measurement Resolution: 0.1 dB
  • Level Measurement Accuracy: 1 dB typ. (2 dB max.)
  • Resolution Filter Bandwidth: TV & CATV: 100 KHz @ -3 dB; SAT: 1 MHz or 5 MHz @ -3 dB selectable
  • Constellation: for TV/CATV and SAT signals.
  • Spectrum: Real time, Max Hold and spectrum memorization with real time compare function
  • Net-id on board: Net-id, NID, TSID, LCN, SAT Orbit Position
  • Echoes, Pre-echoes, Micro-echoes: Representation in real Time
  • Quality: Digital Auto quality Test: PASS-MARGINAL-FAIL
  • TS: TR 101-290 v1.2.1 ANALYSIS, SI, PMT, bit rate, network delay, MPEG services and tables
  • IPTV: measurements and picture decoding up to 30 MBps (opt.)

NOTE:

  • All technical features can change without notice;
  • Some options (APP) must be requested when ordering the instrument;
  • The screens and the texts of the relative MENU, can change without notice from model to model and according to the SW version installed;
  • Visit WWW.ROVERSHOP.IT to check the available accessories.
Features
  • ETR 101-290 T.S. Analyzer
  • Exclusive patented ROVER AUTODISCOVERY system: auto-matically detects and selects analog and digital COFDM/QAM TV signals in both measurement and spectrum mode
  • HELP function: automatically identifies all the signals with digital modulation SAT, TV and CATV
  • Automatic Assistant: Signal Quality analysis, Channel Scan memorization
  • Barscan TV & CATV function from 10 to 100 channels on one screen
  • Buzzer & Noise Margin real time graph for digital signals microinterruptions
  • Reflectometric measurements APP
  • PRODRIVE TEST: REMOTE MONITORING and LOGGING: TS, measurements, spectrum, thumbnails
  • Optical Input signals
  • SATELITE: DiSEqC, SCR & dCSS commands, motorized antenna, dual LNB, SAT FINDER and SAT EXPERT
  • Custom Channel Plans: 25 (199 ch. per plan), Programmable TV, SAT (or combined TV/SAT) by PC or Local Keyboard
  • Loggers: TV, SAT & combined with stop & go function
  • SAT Memory Plan: More than 2.000 transponders prememorized for world wide Satellite.

NOTE:

  • All technical features can change without notice;
  • Some options (APP) must be requested when ordering the instrument;
  • The screens and the texts of the relative MENU, can change without notice from model to model and according to the SW version installed;
  • Visit WWW.ROVERSHOP.IT to check the available accessories.

Request information

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
VEMA Technology Srl
Subscribe to newsletter

"*" indicates required fields

This field is for validation purposes and should be left unchanged.